General
30 results found
-
add MMU Status to Centracs
Add a MMU status screen to see those inputs/outputs as this is another check to see what faults are in the field to help diagnose issues.
18 votesThe ability to see the ASC3 remote front panel was added in Centracs 2.0.1 and released on April 7, 2016. The front panel will allow customers to see the MMU status. It is undergoing Beta testing currently.
-
Add an option in the DB upload/download selections to allow or prevent I/O mapping to be included with the upload/download
In the 2070 world, users can use either a 2070 with a 1b/1E CPU, 2070 with 1C CPU, ASC/3-RM or Cobalt-RM, each with a different I/O map. When users change or upgrade the controllers, whatever I/O map they started with, continues to get downloaded to the newer controller. I've had several controllers go into flash when a different type controller is placed in the field and the DB is downloaded, either through central command or field download request. This is a safety issue, and needs to be addressed. A radio button on the central /upload/download selection screen would be the…
16 votesA change was included in Centracs 2.0.27 to fix the issue of the wrong I/O mapping being uploaded/downloaded.
-
Increase the number of series from 8 in the VOS Hourly Report
Currenlty we use the VOS Hourly Report to extract counts. With only 8 series I have to run 2 reports for most intersections. 12 series would be able to capture all approaches for most intersections (Left, Through, Right) X 4.
Richmond Canada is asking for eight more series, making the total sixteen.
15 votesThe ability to have 16 series in the VOS Hourly reports was added in Centracs version 2.0.21 Please talk to a support engineer about upgrading.
-
Split Monitor to work in free
Be able to examine max times in free mode and determine phase utilization.
14 votesThe ability for Split Monitor to work for Free mode and all Patterns other than 1 was added in Centracs 2.0.1 and released on April 7, 2016. It is undergoing Beta testing currently.
-
Add a copy function to the signal editor so timing plans and detector plans can be copied and pasted to create a second plan.
usually if I am using a second detector plan or timing plan it is one phase that may have a small change or one detector may have a small change, and I will have to type the whole plan 1 again just to change one or two numbers. with a copy function I can copy plan 1 to plan 2 and make that small change without worrying if I missed something. it will also save time.
14 votesThe ability to copy timing plans and detector plans has been added to the database editor in Centracs 2.0.1 and released on April 7, 2016. The database editor in 2.0 now offers copy/paste of tables to and from Microsoft Excel spreadsheets, an ability to create controller templates for later use, and even more copy/paste ease of use functions have been added. It is undergoing Beta testing currently.
-
add the abilty to attached pdfs to a signal, and be able to retrive them from the status window.
This ability would allow a signal plan to be accessed from Centracs to help efficiently diagnose issues.
14 votesThe ability to see to attach PDFs to a signal and be able to retrieve them from the status window was added in Centracs 2.0.1 and released on April 7, 2016. It is undergoing Beta testing currently.
-
12 votes
The systems support team is aware of a specific pattern in Centracs that gives access to such functionality in the ASC3/COBALT. Please see your support engineer for information. Thank you for submitting the idea.
-
Add a new map legend for Automatic Flash.
Currently, Automatic Flash shows up as the same flashing red icon as MMU Flash. It is helpful to see the difference on the map (for fire station signals that flash, for example). Even Pyramids had this feature :-).
10 votesThe new Automatic Flash icon was added in Centracs version 2.0.15.
-
In the VOS reports, add a Sum of All Series field to the data tables.
Originally came in from Richmond, BC Canada
9 votesThis item is scheduled for release in the 2.0.6 version.
-
Show programmed Max times in Intersection display during Free operations
During Free operations, the "Programmed" time shows "Data Unavailable for Current Pattern". Please show the programmed max times
7 votesThis feature was added to Centracs in the 1.11.16 version. In order for the programmed max times to show up, the user must perform a database editor save if they have not after Centracs was upgraded to 1.11.16.
-
Make the entity tree sort/ordering sticky
Won't stay sorted by "name". Changes to another sort order once or twice a day. Doesn't seem related to login/logout. Not sure what the trigger is or how to duplicate.
7 votesA problem ticket has been created to address this problem. Please speak to a support engineer about PR 28858 .
While we appreciate your diligence in using Centracs, please use support channels next time to report problems. UserVoice should be reserved for new enhancement ideas. Thank you.
-
Be able to schedule a report to be saved in a folder or network location, not just email the report
Their biggest issue with the emailed reports is the ability to automate the post process of the reports. Easier to automate grabbing from a folder then an email address. This allows sharing of the Centracs data with other departments much easier.
5 votesReleased in January 2016. Version 1.11.18.
-
Allow users to turn off pattern changes in MOE reports.
At locations with TSP or other logic that brings about frequent pattern changes, the vertical lines make the graphs largely unreadable.
See the image at the link below for one example.
http://i.imgur.com/bo3g7MR.png5 votesfix to pattern change lines is now released in version 2.1.3.
-
Add the ability to view Status Displays (Controller, Coordinator, Detector, etc.) in Centracs
So you know exactly what the controller is doing.
5 votesThe ability to see the ASC3 remote front panel was added in Centracs 2.0.1 and released on April 7, 2016. The front panel will allow customers to see all the status displays. It is undergoing Beta testing currently.
-
Copy Adptive or Traffic Responsive Algorithm
Create the ability to copy a traffic responsive algorithm. Often there are minor small changes in an algorithm at various times of the day. Currently without a copy feature you need to rebuild the entire algorithm when the only change you want to make may be at a single intersection. For example adaptive has problems with shift change where it has reduced a split and then cannot recover when a local shift lets out. To remove that phase from adaptive control at a specified time i need to reproduce the entire algorithm for the rest of the zone. a copy…
3 votesReleased in January 2016. Version 1.11.18.
-
Having an OR function in the Entity Configuration for Main and Side Street Phases
Using an OR function on the Main and Side Street Phases in the Entity Configuration menu. As it operates, the map shows green only if all the phases are on. If left turns are operated lead/lag the direction will only show as Green on the map for a short portion of the cycle.
3 votesThanks for the suggestion. You should be able to do this using the MSGSSGUseOR flag. If you go to Global Settings in the Management menu, add this setting and set to true.
-
3 votes
Request has been implemented. Release version is 2.1.0.36.
-
Add feature of a description field in the 'Load Saved Data' window of the Database editor.
This would require a new field when saving the data where a descriptor could be entered.
Having these complementary features would be a huge savings of time when having to retrieve and download pre-detour timings when
the detour is completed.3 votesThe database editor in Centracs 2.0 is completely new. It includes the ability to add a description for previous saves. Centracs 2.0.1 was released on April 7, 2016. It is undergoing Beta testing currently.
-
Separate Remote Front Panel permissions from upload/download to allow, READ ONLY, turn on or off , or assign permissions per user
currently like the feature but have some concerns with security because there doesn’t seem to be a way to set user permissions as this application is tied to the Upload/Download permissions. Because the Upload/Download has plenty of logging associated with it and also the Controller warning checks to help mitigate mistakes from being downloaded they would like to separate the control of the applications. Jon Nelson (Lake County Traffic Engineer) proposed a couple solutions.
Full user permission options to turn feature on/off by user application role
Global Options to turn the entire feature on/off for the system
…1 voteThis item was added in Centracs version 2.0.15. Please see your support representative about upgrading to a version with this new feature.
-
Change Adaptive to operate without 3 cycle's worth of contiguous data
Be able to make Centracs Adaptive act faster so that 3 cycle's of data is not required to start making adjustments.
1 voteReleased in September 2015. Version 1.11.14.
- Don't see your idea?