General

  1. add MMU Status to Centracs

    Add a MMU status screen to see those inputs/outputs as this is another check to see what faults are in the field to help diagnose issues.

    18 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  2. Add an option in the DB upload/download selections to allow or prevent I/O mapping to be included with the upload/download

    In the 2070 world, users can use either a 2070 with a 1b/1E CPU, 2070 with 1C CPU, ASC/3-RM or Cobalt-RM, each with a different I/O map. When users change or upgrade the controllers, whatever I/O map they started with, continues to get downloaded to the newer controller. I've had several controllers go into flash when a different type controller is placed in the field and the DB is downloaded, either through central command or field download request. This is a safety issue, and needs to be addressed. A radio button on the central /upload/download selection screen would be the…

    16 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  3. Increase the number of series from 8 in the VOS Hourly Report

    Currenlty we use the VOS Hourly Report to extract counts. With only 8 series I have to run 2 reports for most intersections. 12 series would be able to capture all approaches for most intersections (Left, Through, Right) X 4.

    Richmond Canada is asking for eight more series, making the total sixteen.

    15 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  4. Split Monitor to work in free

    Be able to examine max times in free mode and determine phase utilization.

    14 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  5. Add a copy function to the signal editor so timing plans and detector plans can be copied and pasted to create a second plan.

    usually if I am using a second detector plan or timing plan it is one phase that may have a small change or one detector may have a small change, and I will have to type the whole plan 1 again just to change one or two numbers. with a copy function I can copy plan 1 to plan 2 and make that small change without worrying if I missed something. it will also save time.

    14 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    2 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →

    The ability to copy timing plans and detector plans has been added to the database editor in Centracs 2.0.1 and released on April 7, 2016. The database editor in 2.0 now offers copy/paste of tables to and from Microsoft Excel spreadsheets, an ability to create controller templates for later use, and even more copy/paste ease of use functions have been added. It is undergoing Beta testing currently.

  6. add the abilty to attached pdfs to a signal, and be able to retrive them from the status window.

    This ability would allow a signal plan to be accessed from Centracs to help efficiently diagnose issues.

    14 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  7. 12 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  8. Add a new map legend for Automatic Flash.

    Currently, Automatic Flash shows up as the same flashing red icon as MMU Flash. It is helpful to see the difference on the map (for fire station signals that flash, for example). Even Pyramids had this feature :-).

    10 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  9. In the VOS reports, add a Sum of All Series field to the data tables.

    Originally came in from Richmond, BC Canada

    9 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  10. Make the entity tree sort/ordering sticky

    Won't stay sorted by "name". Changes to another sort order once or twice a day. Doesn't seem related to login/logout. Not sure what the trigger is or how to duplicate.

    7 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    2 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →

    A problem ticket has been created to address this problem. Please speak to a support engineer about PR 28858 .

    While we appreciate your diligence in using Centracs, please use support channels next time to report problems. UserVoice should be reserved for new enhancement ideas. Thank you.

  11. Show programmed Max times in Intersection display during Free operations

    During Free operations, the "Programmed" time shows "Data Unavailable for Current Pattern". Please show the programmed max times

    7 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  12. 5 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →

    The ability to see the ASC3 remote front panel was added in Centracs 2.0.1 and released on April 7, 2016. The front panel will allow customers to see all the status displays. It is undergoing Beta testing currently.

  13. Allow users to turn off pattern changes in MOE reports.

    At locations with TSP or other logic that brings about frequent pattern changes, the vertical lines make the graphs largely unreadable.

    See the image at the link below for one example.
    http://i.imgur.com/bo3g7MR.png

    5 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  14. Be able to schedule a report to be saved in a folder or network location, not just email the report

    Their biggest issue with the emailed reports is the ability to automate the post process of the reports. Easier to automate grabbing from a folder then an email address. This allows sharing of the Centracs data with other departments much easier.

    5 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  15. Add feature of a description field in the 'Load Saved Data' window of the Database editor.

    This would require a new field when saving the data where a descriptor could be entered.

    Having these complementary features would be a huge savings of time when having to retrieve and download pre-detour timings when
    the detour is completed.

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  16. 3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  17. Copy Adptive or Traffic Responsive Algorithm

    Create the ability to copy a traffic responsive algorithm. Often there are minor small changes in an algorithm at various times of the day. Currently without a copy feature you need to rebuild the entire algorithm when the only change you want to make may be at a single intersection. For example adaptive has problems with shift change where it has reduced a split and then cannot recover when a local shift lets out. To remove that phase from adaptive control at a specified time i need to reproduce the entire algorithm for the rest of the zone. a copy…

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  18. Having an OR function in the Entity Configuration for Main and Side Street Phases

    Using an OR function on the Main and Side Street Phases in the Entity Configuration menu. As it operates, the map shows green only if all the phases are on. If left turns are operated lead/lag the direction will only show as Green on the map for a short portion of the cycle.

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  19. Allow alert icons to be placed on the map viewer wider than just the zoomed in intersection.

    I would like to see an alarm icon on the overview map so I can see active door alarms.

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
  20. Purdue Phase Termination Chart coming to MOE module? Perhaps the most valueable high resolution data tool that doesn't require detection.

    Is there a way to use the Purdue Phase Termination Chart in Centracs 2.0? It doesn't appear to be in the MOE module and the split monitor does not really show enough data to be an equiivalent. Anyway to fold in some of the UDOT source code into Centracs for this very valueable tool? If, I'm just not looking in the right place, please direct me. Thanks,

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Flag idea as inappropriate…  ·  Admin →
← Previous 1
  • Don't see your idea?

General

Categories

Feedback and Knowledge Base