Skip to content

General

31 results found

  1. Add keyboard controls for the Centracs map editor

    Left/Right/Up/Down moves map editor icons one pixel at a time.
    Shift Up/Down scales the icons
    Shift Left/Right rotates the icons

    9 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite has decided against the implementation of this idea. While we appreciate the suggestion, we do not feel it coincides with the long term vision for the product. Thank you for the submission and please do not be discouraged in suggesting new ideas.

  2. Make it so a user can define a map layer that automatically updates from external sources

    It would be good to be able to have a map layer that periodically self updates. For example, a weather service map or a google, bing or Ways map that shows current incidents and traffic conditions. The ability to replay animation loops would be a nice enhancement to this.

    4 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    This would require custom software development dependent on the service Centracs connects to. There also may be limitations by the service provider so consideration would need to be made there. Overall, this idea is definitely something we could address however it would not be something we could include in a general release.

    Please discuss this with product management if custom development is a route you would like to take.

  3. Would like to be able to add entities to intersections including cameras and URLs

    It would be nice to add entities to intersections such as cameras and ULR links that would be to equipment such as switches and battery backups. That way when you look at an intersection in the entity tree you can see all of its equipment under it. Currently we just make a group and a list of all of the cameras or URLs.

    7 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite has decided against the implementation of this idea. While we appreciate the suggestion we do not feel it is worth making this change. Thank you for the submission and please do not be discouraged in suggesting other ideas.

  4. add the ability to attach and edit Excel documents and save/update existing excel documents

    When we try to attach an excel document and then change that saved document or update it, the document is not saved properly. for some reason the original saved document calls its self a temp~file and is saved in another location.

    9 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite has decided against the implementation of this idea. While we appreciate the suggestion, we do not feel it coincides with the long term vision for the product.

    The original idea behind attaching documents to an intersection was to allow users the ability to upload a static document for reference. Altering the document and saving through Centracs was never the objective.

    Thank you for the submission and please do not be discouraged in suggesting new ideas.

  5. Signal status window doesn't recognize a Timing Plan 2 running a different Max time?

    We switch to Timing Plan 2 periodically to allow different max times, etc - the signal status window always shows max times programmed from timing plan 1

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite deems this to be a problem in the software and not an enhancement. We are going to remove this idea but we have added a Test Track Problem Report for it in our system. The PR number is 29115 and will be scheduled for a release. Please ask your Support Engineer for further details. Thank you for your contribution to Econolite Uservoice.

  6. Allow user to assert Veh Max recall via Centracs

    Currently Centracs users can assert Vmin and Ped calls to signal.
    It would be useful to add the ability to assert a Vmax call also.

    20 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Kun Yang responded

    This is a good idea but development lacks sufficient resources to implement this in a reasonable time frame.

  7. Make Centracs Reports work in Canada

    Currently, if the Windows Region is set to English (Canada), creating a report will 'crash' Centracs causing it to close. The issue is likely due to the date format being different by default. Setting the PC to English (US) allows reports to work but in my organization the region is reset at each reboot.

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Dear Customer,

    We’ve added this problem report to our Test Track system. The PR number is 28745. Please use this number when talking to your support engineer about scheduling for a fix.

    While we appreciate all feedback, please be mindful that we prefer to keep UserVoice free of defect reporting. The original idea for this forum was to create another channel for new ideas and enhancements to reach Econolite. Thanks for your help.

  8. Acknowleged Alerts better managed

    After an alert has been "Acknowledged," do not allow Centracs to keep populating alerts associated with that acknowledged alert.

    14 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite has decided against the implementation of this idea. While we appreciate the suggestion, we do not feel it coincides with the long term vision for the product. Thank you for the submission and please do not be discouraged in suggesting new ideas.

  9. Bug??

    ever since upgrading to 2.0 the Central database has had different data than what is in the field. The central data has Hardware alt seq checked, Ped clr checked, and inserts random Flash timing, usually at 177sec. and all red timing at 170 sec. also has errors in the detector area. I have scheduled a city wide database upload and save every friday morning at 2 a.m. but this does not clear the errors.the only way that i have found is to do a manual upload and save.

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    We are unable to address this item from the UserVoice side. UserVoice is solely for the purpose of gathering enhancement ideas from customers. Please contact your support engineer to enter a problem report for fixing this issue. Thank you for your contribution.

  10. Repair the VOS hourly report.

    When running the Hourly VOS report found several instances where 15 minute polling periods are either missed or not present.

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Please report the errors to the support team. We will fix the issue as expediently as possible.

  11. Look into Why you are not using NTCIP

    I need to be able to add different controllers to your system

    6 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite Centracs currently supports communicating with supported controllers through the NTCIP protocol. To add unsupported controllers would require a level of custom work that would be outside the scope of a UserVoice idea.

    Please discuss this with product management if custom development is a route you would like to take.

  12. Be able to edit the Warning Check Categories from the signal editor

    The Signal editor does not have a way to edit the Warning Check Categories. You have to do it at the controller or the Front Panel function.

    6 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite has decided against the implementation of this idea. While we appreciate the suggestion, we do not feel it coincides with the long term vision for the product. Thank you for the submission and please do not be discouraged in suggesting new ideas.

  13. Be able to schedule when triggers are active

    Users would like the ability schedule when a trigger happens if at all when the BlueToad Link Threshold Increase/Decrease event occurs.

    4 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite has decided against the implementation of this idea. While we appreciate the suggestion, we do not feel it coincides with the long term vision for the product. Thank you for the submission and please do not be discouraged in suggesting new ideas.

  14. Make trigger activated actions operable by time of day.

    Triggered user alerts can be limited to certain times of day/day of week using the on-call scheduler. It would be helpful to have the same functionality for non-alert actions that are allowed to occur via triggers.

    For example, you may only want to set a pattern or turn on a DMS via a trigger at certain times of day. Currently there's no way to do that.

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite has decided against the implementation of this idea. While we appreciate the suggestion, we do not feel it coincides with the long term vision for the product. Thank you for the submission and please do not be discouraged in suggesting new ideas.

  15. Monitor and create events (bad comm. etc.) for CCTV cameras.

    Monitor CCTV cameras and create events (bad comm. etc.) for them. Currently, there is no notification (that I'm aware of) if a camera stops working properly.

    4 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    This would require custom software development dependent on the camera Centracs connects to. There also may be limitations by the camera provider so consideration would need to be made there.

    Please discuss this with product management if custom development is a route you would like to take.

  16. Add an "exclude" feature in the Scheduler.

    Currently, you can't exclude individual signals that are grouped into larger regional entities. The only way to exclude an individual signal from a scheduled event is to add each intersection as an individual entity and omit the few you don't want to add, which would be very time consuming.

    6 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    This was a good enhancement idea but at this time, development lacks sufficient resources to implement this in a reasonable time frame. Please see your support engineer about using groups to accomplish this task.

  17. Special functions in the graphics

    We use blank-out signs (i.e., no left/right turn, no turn on red, etc.) that are turned on or off by special functions by time-of-day. We also use them for lane assignments that change by time-of-day (i.e., left-only or thru+left). Currently in the graphics, there is a symbol (it looks like the "on/off" symbol) that you can use to show that a certain special function is on, but I would like to be able to customize the look of the symbol, for example, to look like a "no left turn" sign in the graphics when the associated special function that corresponds…

    8 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite has decided against the implementation of this idea. While we appreciate the suggestion, we do not feel it coincides with the long term vision for the product. Thank you for the submission and please do not be discouraged in suggesting new ideas.

  18. 6 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    Econolite has decided against the implementation of this idea. While we appreciate the suggestion, we do not feel it coincides with the long term vision for the product. Thank you for the submission and please do not be discouraged in suggesting new ideas.

  19. Allow the signal database editor to change the startup screen in an ASC/3 (MM 8-5).

    Many of our customers change the start up screen to reflect the intersection location. To make the changes on the ASC/3 keypad is time consuming. The changes could be made much quicker using the PC keyboard and Centracs, then downloading the database to the ASC/3.

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    This functionality is in the ASC/3 Database Editor. Please see the Configuration main tab, Logging/Display sub-tab.

  20. "Detector State" Polling

    Allow Centracs to bring back "Detector State" information rather than "Detector Phase State". This would allow for better troubleshooting in that the specific loop can be monitored rather than the current scenario of loops showing a phase state.

    7 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    You have left! (?) (thinking…)
    2 comments  ·  Centracs  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
    declined  ·  Econolite responded

    The systems support team is aware of a work around that gives access to such functionality in the ASC3/COBALT. Thank you for submitting the idea.

← Previous 1
  • Don't see your idea?

General

Categories

Feedback and Knowledge Base